Apparatus needed in cleaning the fuel injector include a lengthy and strong screw driver and a fuel injector cleaning equipment that is purchased. During purchase it is always advisable to choose the best while buying.
Procedure of using the Fuel Injector Cleaner
The cleaning process is necessary and crucial therefore the buyer should follow the instructions that are provided with the kit. The procedure is as follows.
Before commencing the clean up the buyer should disable the fuel return line orfix a u-tube so that the fuel can get back to the fuel tank, as the fuel return line is disabled the car owner should also make sure the regulator is not connected.
The cleaning equipment should be attached directly to the fuel port located on the fuel rail; the fuel lid should bedisconnected from the gas tank to make sure that there is no excessive pressure building up in the fuel system. The cleaning equipment conveys a tremendous amount of pressure into the fuel system.
The car owner should also change the ignition during the cleanupto make sure that the fuel tank will shut down this will ensure that the engine does not turn over. The car owner should then open the regulator on the kit until the reading of the fuel pressure matches the one that fits the specific vehicle.
After all this the owner can then start the engine to run the cleaning solvent through the injectors and allow it to work up to the exhaustion of the solvent. After 5 minutes the engine will shut down, the vehicle owner should then change the setting of the fuel pump button and get another gas lid.
The pressure regulator should then be connected and the car owner should then start the engine once again to confirm the fuel injectors work properly. A lengthy screw driver can be used as a tester. The car owner should pay attention to funny sounds that are produced in quick series this show the injector is in a proper operating position.
Things that should be taken into consideration while cleaning the fuel injectors
The gasoline is flammable and therefore the buyer should take proper care during the cleanup. Tough solvents can hit plastic and rubber apparatus in the fuel tank, fuel lines and valves. Critical tests like CO and HC levels may need to be added in the emissions, injector pressure drop test may also be needed to make sure that the injectors are responding to the cleaning process.
Importance of cleaning other parts of the fuel system
Cleaning the cars fuel injector and other components of the fuel system is economical unlike taking it to the auto service shop. A proper test, monitor of the car is necessary to ensure the fuel injectors and the other components are efficiently working.
During the cleanup it is also important to remove the fuel varnish and clean them with aerosol solvents. Parts such as the regulators and engine should also be cleaned, proper cleaning of the fuel injectors and the components can serve the car owner for years without the car ever breaking down or consuming more fuel than the intended amount.
It is important that you understand how to use the fuel injector cleaners properly as this is the only way you will eliminate all the dirt and deposits for a better functioning fuel system.